high power UV curing system UV LED curing device

high power UV curing system UV LED curing device 1 pure UV light 2 no thermal effects 3 low power consumption   high power UV curing system UV LED curing device                  

 

Cool cure by LED UV light

Light intensity up to 6,000 mW/cm2

No thermal effect

Long service life without consumables

Uniform radiation, low power

 

 

UVATA  Introduction

 

UVATA company, based on its advanced optoelectronic design and manufacture technology, supplies UV producing equipments and detecting devices to many enterprises. Meanwhile it helps solve specialized optical problems.

Products:

 

UV light Division                                 UV measuring device                                 Optical lens

Portable UV LED light                            UV integrator                                                 relay lens

UV LED spot light                                   UV radiometer                                               Interferometer Lens

UV LED line light                                                                                                          Industrial lens

UV LED plane light                                                                                                       CTP printing lens

  

OUTSTANDING FEATURES

Single wavelength UV light output, no harmful thermal effect.

 

Adopting high power LED radiation single wavelength light, our products have very high pertinence and efficiency. By eliminating all the light radiation effect, especially the infrared effect, leaving only the main wavelength light, thus greatly decrease the thermal effect towards work piece. It is the ideal curing light for thermal sensitive precision materials and components. Such as ultra-thin resin lens.

 

Low power consumption and energy saving

 

The UV LED light power consumption is as low as one of dozens of UV mercury lamp power consumption. Our product could largely decrease annual energy consumption and exhaust emission, thus reduce the environmental load.

 

Free layout, space saving

 

Adopting UV LED, the volume is cut down about 90 percent compared to the mercury lamp. Meanwhile the weight is also substantially lightened. There is no need to worry about the install space and its layout.

 

The irradiation light head could be single or group with one controler, consequently saving the equipment investment.

 

Customers could choose the number of the irradiation light head according to their needs. One set UV LED line or plane light could replace many traditional mercury lamps. This will not only reduce equipment investment, but also single working mode or linkage working mode could be set according to the working environment.

 

Constant high intensity light output

 

In UV LED area, adopting UVATA unique heat dissipation technology, we created high light intensity and long life type of cooling, which make restrain the drifting to the minimum state, realizing stable irradiation.

 

Long working life reduces operating cost

 

Compared to mercury lamp, the working life of LED light is greatly prolonged. This is the main advantage of UV LED. Different from the mercury lamp which is lighting all the time, UV LED could be lighting and stop lighting in a second, so its actual life could be longer.

 

Uniform irradiation in large area

 

Adopting the unique UVATA optical system, our products could restrain the large area light intensity deviation to minimum state. It could also restrain the deformation during curing, spot drying, and adhesive curing; assisting customers achieve high quality product management.

 

SPECIFICATION

Controller

Model	UP 611  (180*230*310 mm)
Constant irradiation	irradiation power (0-100%), irradiation time (max. 999.9s)
mode irradiation	step mode (16 steps)
accumulated time display	unit **hour **minute **second
cooling type	air-cooling, head with temperature protection
support module No.	1-4
power supply	100-240V  AC, 50 Hz
current consumption	<30VA
vibration tolerance	10-150Hz acceleration 50m/s2, half amplitude 0.35mm, X/Y/Z 8 mins. 10 times
drop impact resistance	150m/s*s 6 directions (up/down, right/left, front/back), each 3 times
material	aluminum
operation method	interface button, foot pedal, RS232 port
accessory	user manual, key, power supply cable

UV LED Irradiator  

No.	Model	Irradiate area (mm)	Dimension (mm)	Cooling	Wavelength
11	GP303	330*30	60*370*60	Water	365/395/405 nm
12	GP304	380*30	54*450*120	Fan
13	GP531	530*30	54*600*120
14	GP532	590*30	54*650*120
15	GP041	40*20	60*65*120
16	GP061	60*20	40*94*120
17	GP091	90*20	120*65*120
18	GP121	120*20	81*150*120
19	GP171	170*20	81*220*120
20	GP172	170*20	200*50*50	Water

 

 

Why you should choose UVATA ?

UVATA has established good reputation and high quality position and it supplies high quality UV lights.Now it has a new UV curing solution that is the UV LED spot curing system, line curing system and area curing system. They are the result of our accumulated technology and will reduce environmental load and will be widely applied to UV curing and related industry. As an optoelectronic equipment manufacturer, we also developed UV detector and feedback system to monitor our producing and ensure our quality.

high power UV curing system UV LED curing device